Hotline:
13923434764
This product is an AB two-component epoxy resin structural adhesive, which can be quickly cured to improve work efficiency. It has excellent bonding properties to metals, ceramics, glass, and plastics. It can be cured at room temperature, or it can be cured by heating, which is an excellent structural adhesive glue.
(1) Product Overview
This product is a two-component epoxy resin structural adhesive, which can quickly curing and improve work efficiency. It has excellent bonding properties to metals, ceramics, glass, and plastics. It can be cured at room temperature and can also be cured by heating.
If you still have questions after reading, please click the QR code to enter the shake number to find AB fast-drying small video, you can see the whole picture of this product more intuitively..
(2) Features
● A, B component, 1: 1 proportion, easy to operate and convenient
● High mechanical properties, strong internal strength, meet high strength bonding requirements
● Small volume shrinkage after curing, low linear expansion coefficient
● No corrosion, no damage to the substrate;
(3) Technical parameters
Before curing parameters:
|
project |
Performance |
Remark remark |
|
|
Group A |
B component |
||
|
Exterior exterior |
Light yellow / transparent viscous fluid |
Light yellow / transparent viscous fluid |
Adjustable |
|
Viscosity (25 ° C) MPA.S |
10000 ~ 16000 |
15000 ~ 20000 |
|
|
Power (25 ° C) g / cm3 |
1.16 ± 0.1 |
1.10 ± 0.1 |
|
|
Mix ratio (weight ratio) |
A: B: 1 |
||
|
Location time (min / 25 ° C) |
5 ~ 10 |
Adjustable |
|
|
Complete curing time (h) |
3 ~ 7/25 ° C or 1/80 ° C |
||
After curing parameters:
|
project |
Performance |
Remark remark |
|
Curing color |
Pale yellow transparent |
|
|
SHORE D) |
80 ± 5 |
Adjustable |
|
Bonding strength (MPa) |
|
|
|
Dielectric constant (25 ° C, 1 kHz) |
|
|
|
Volume resistance (Ω-cm) |
3.5 × 1013 |
|
|
Surface resistance (Ω-cm) |
3 × 1014 |
|
|
Medium loss (25 ° C, 1 kHz) |
0.015 |
|
|
Dielectric strength (25 ° C) kV / mm |
|
|
|
Temperature range (° C) |
-40 ~ 100 |
(4) How to use
1. The surface of the substrate should have no water, clean and clean;
2. Mount the double-pinch into the rubber gun or load the push rod at the tail to open the lid of the front end of the double-pinch, load the static mixing tube into the card, and push the push rod or extruded the rubber gun, so that the collapse Full of static mix tubes, please don't use the first little glue;
3. Wipe the rubber material on a hand-conditioned surface, and immediately adhere the substrate to be bonded and press it;
4. When discovering the push rod or rubber gun, please replace the static mixing tube; (Static mix tube is consumable, please prepare enough)
5. Use in air circulation to avoid contact with collapse;
6. After use, remove the static mixing tube and cover the cover of the front end of the double needle.
Note: It is normal to exotherm when mixing.
(5) Storage and validity period
The product should be stored at a cool and ventilated and ventilated and ventilated in a temperature below 25 ° C, and the shelf life is 6 months from the production date. It can still be used after overdue testing.
(6) Packaging specifications:
1. Double Needle: 50ml / Support
2. Double Needle: 400ml / Support
Shenzhen Dimenglong Technology Co. , Ltd.
Address: Building 1, Block C, 2nd floor, Huiye Science and Technology Park, Guanguang Road, Tangjia community, Fenghuang Street, Guangming District, Shenzhen City
